Expert Answers about Forest River Rockwood Camper

• Switch for Solera Awning to Allow it to Power In and Out
• The Solera switch part # LC285500 that you referenced was designed to fit all Solera power awnings so it would work well to give you an inside switch to extend and retract. This would not affect the batteries ability to charge either.
  view full answer...


• Replacement for Dometic Duo Therm 13,500 Btu Air Conditioner
• The Advent Air Conditioner you mentioned will be a replacement for your Dometic Duo Therm 13,500 Btu AC, and it is available in either black or white. - Black: Advent Air RV Air Conditioner - 13,500 Btu # ACM135B - White: Advent Air RV Air Conditioner - 13,500 Btu # ACM135 To add a heat strip to warm you up on a cold morning you will need the Electric Heat Strip # ACMHD, and the Start Capacitor # ACMSCKIT is a good idea to ensure your AC is always able to start. I have added links to...
  view full answer...


• Can The Atwood Air Command RV Air Conditioner Replace An Old Dometic RV Air Conditioner
• The Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump # AT15028-22 is a complete replacement, which means you'd replace the rooftop unit, air distribution box, and thermostat of your old Dometic system with this new one. You definitely can replace your current system but if you're just looking to only replace the rooftop unit then I recommend going with one like the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor - 15,000 Btu - Black # ACDOM150B....
  view full answer...


• Replacement Taillight for Rockwood Freedom 2318G Trailer
• Thanks for the photo, and based on that it looks like you have the Optronics RV Tail Light - Driver's Side # RVST61 and Passenger's Side # RVST60. To ensure you want to measure, as these both measure 8-5/8" long x 3-3/16" tall x 2-1/4" deep. If that is the right one, the correct replacement lenses are - Driver's Side: Replacement Lens # AST61B - Passenger's Side: Replacement Lens # AST60B If you have a different measurement let me know but I'm confident this is what you have.
  view full answer...


• Weight Distribution System that Allows For Bracket Placement 35 Inches Behind Hitch Ball
• The Curt Weight Distribution systems part # C17052 and C17002 brackets fit frames that are 2-3/4" wide so you will not have an issue with the brackets fitting your frame. Curt does not specify bracket placement for MV weight distribution systems however, the bars measure 30-5/8" long. The two Curt systems you mention also have a tongue weight range of 800 lbs-1,000 lbs which is very overrated for your setup with a 450 lb tongue weight. An overrated weight distribution system can cause a...
  view full answer...